Skip to Content

Processes

Set up the manufacturing processes you offer in Phasio, such as FDM, MJF or SLA, with their own settings, size limits, finishes and build orientation rules.

Available to manufacturers on Startup, Pro and Factory Floor plans

A process is a manufacturing service you offer: a manufacturing technology together with the configuration that goes with it, including its materials, post-processing options, infill options and precision options. Each process has its own pricing equation that you define. Phasio supports a wide range of manufacturing technologies, including FDM, SLA, SLS, MJF, DMLS, PµSL, sheet-based jetting (SBJ) and fused granulate fabrication (FGF), and you can run several processes on the same technology with different pricing, for example the same technology on a different machine.

Processes are what your customers choose from on the Storefront, and what your team chooses from when you build a quote or order. Each process can be set up with its own description, material options and operational parameters to reflect your actual shop floor capabilities.

How processes work

  • General and customer-specific processes. A general process is available to every customer. A customer-specific process carries pricing logic that you don't want to make generally available, and only that customer sees it. See Customer pricing and catalogs.
  • Draft until priced. A new process shows a Draft badge until it has a pricing equation marked as live. Processes and materials without a live equation are drafts and cannot be used for quoting, including internally. See Pricing and Pricing equations.
  • Everything else hangs off the process. Materials, infills and precision levels are set per process (see Materials and options). Finishes are assigned per process (see Assign post-processing options). Production operations are assigned through routing (see Routing).

What you can configure for each process

SettingWhere
Basic settings, bulk pricing quantities, size limitsProcess overview
Materials and material pricesMaterials and options
Pricing equationPricing equations
Precision and tolerance levelsMaterials and options
Infill densities (additive)Materials and options
Compatible finishesAssign post-processing options
Production operationsRouting
Build orientationBuild orientation constraints

Add a process

You can create a process in one of two ways:

  • Create a general process and pricing (not customer specific):
    1. Open Settings from the user menu, then click Processes under Manufacturing.
    2. Click New Process under the page header.
  • Create a customer-specific process and pricing:
    1. Click Customers in the main sidebar.
    2. Select a customer and go to the Pricing tab.
    3. Click the + button in the top-right corner of the Custom pricing section.

Both options open the Add New Process dialog:

  1. Choose your desired Manufacturing Technology from the supported production methods catalog.
  2. Provide a unique Description that clearly communicates technology capabilities, limitations, and ideal applications.
  3. Decide whether to apply bounding box limitations. To limit part size, turn on Set Bounding Box. Under Bounding Box Dimensions, enter the maximum length, width, and height this process can accommodate, in that order.
  4. Toggle the Internal Process setting to control visibility. When enabled, the process is available for internal use only and does not appear as a customer-selectable option on the Storefront.
  5. Click Create Process to save and add the new manufacturing process. Phasio opens the new process's page.

The new process is a draft and cannot generate quotes until you give it a live pricing equation. See Pricing equations.

Process overview

Each process has its own settings page. On its Overview tab, the Basic Settings section has the basic configuration options for that manufacturing technology:

  • Process description: Describe the process's capabilities, limitations, and ideal applications for both internal teams and customers.
  • Bulk Pricing Quantities: Set volume-based pricing tiers by defining quantity breakpoints that unlock preferential pricing for larger production runs. This helps encourage higher-volume orders with a lower cost per unit.
  • Internal Process (toggle): Turn it on to restrict the process to internal use only; turn it off to make the process available and visible to customers on the Storefront.
  • Bending Analysis and Machining Analysis (toggles): Turn these on for sheet metal or CNC processes. Phasio then shows the part's bending or machining analysis in the part viewer.

Below it, the Size Limitations section restricts part dimensions for this process. Turn on Enable size limit and define the maximum allowable Length, Width, and Height in mm.

Click Save Changes to save both sections.

Bending and machining analysis

With Bending Analysis on, supported sheet metal CAD files are analysed for bend count, material thickness, flat blank area and bend geometry. You can review the detected bends in the model viewer.

With Machining Analysis on, supported CNC files are checked for holes, pockets, tooling constraints, setup estimates and areas that need finishing work. The results appear in the part viewers, so quoting and engineering review the same manufacturing detail.

The sheet metal and machining values are also available in your pricing equations. See Pricing equations and the worked process examples.

Manage processes

The Processes list under Settings > Manufacturing > Processes gives you one view of all the manufacturing technologies you offer, along with their types and descriptions, so customers see accurate, up-to-date options when placing orders.

Edit a process

  1. Open Settings from the user menu, then click Processes under Manufacturing.
  2. Click any row in the list of manufacturing process configurations.

This opens the process page, where you can update key parameters such as pricing equations, post-processing options, and workflow settings. The page has the tabs Overview, Materials, Infills, Precision, Post-processing, and Workflows. The Workflows tab needs the Factory Floor plan.

Row actions

Use the icon buttons in the Actions column of the process row:

  1. Set as Default: Make this the default manufacturing method that is automatically selected for customers visiting your Storefront. The Auto selected column shows the default process. Click Unset Default to clear it. Customer-specific processes have no default action.
  2. Duplicate: Create a copy of the process to quickly configure similar setups. The Duplicate Technology dialog asks for a Description and, if needed, an organisation to duplicate the process to.
  3. Delete: Remove the process from your available manufacturing methods, deleting it from both customer view and internal use. Phasio asks you to confirm. Deleting a process also deletes all unpaid parts configured with it, and you cannot undo it.

Duplicate or delete?

Use Duplicate when you want a similar process, for example the same technology with a different machine. The copy keeps the configuration, so you only change what is different.

Delete removes the process from your Storefront and from internal use. If you only want to change what customers see first, use Set as Default on another process instead.

Assign post-processing options

Assign each process the post-processing options that work with it, so customers only see finishes that match the production method they select. This reduces confusion, prevents errors, and simplifies ordering.

  1. Open Settings from the user menu, then click Processes under Manufacturing.
  2. Select the process you want to configure, then go to the Post-processing tab.
  3. Under Post processings, click Add post processing to view all the post-processing options configured in your Phasio workspace. Type to search the list.
  4. Select the post-processing options you want to associate with this process.
  5. Click Update to save your changes.

If the list doesn't include the option you need, create it first. See Post-processing.

Why assign post-processing per process

Not every finish works with every manufacturing process. When you assign options per process, the Storefront only offers finishes that your shop can actually apply to the selected process. This prevents orders that you would have to reject or correct by hand.

Review these assignments when you:

  • Add a new process.
  • Add a new post-processing option. It is not visible to customers until you assign it to at least one process.
  • Stop offering a finish for one process but keep it for others.

To stop offering a finish for every process at once, delete it or turn off Purchasable from the post-processing list. See Post-processing.

Build orientation constraints

When a part needs to be manufactured in a specific orientation to preserve tolerances, surface finish, or structural integrity, you can lock that orientation. A fixed orientation constraint is stored on the part specification and submitted with the requisition, so it stays with the part through the entire production workflow. Phasio exports the constraint through CAMSPEC to nesting and production software such as Dyndrite, AMISpro, 4D Additive and netfabb, so the part is built in the orientation you set.

Constraints affect nesting and production planning, not pricing. The bounding box values used by pricing equations come from the uploaded geometry, and rotating the part has no effect on them.

There are two ways a part gets a constraint:

  • You set it while editing an order or quote. These steps don't depend on any setting.
  • Your customer sets it on the Storefront with Use Original Orientation, which locks the part to the orientation of their uploaded CAD file. This needs the Fixed Orientation Constraint setting.

Let customers lock orientation

Available to manufacturers on Pro and Factory Floor plans

To turn on the Fixed Orientation Constraint setting:

  1. Open Settings from the user menu. Settings > Workspace > General opens.
  2. In the Features section, turn on Fixed Orientation Constraint. On other plans the setting shows a lock icon and cannot be changed.
  3. Click Save.

Set an orientation constraint

  1. Open the order or quote editor. For a new order or quote, this is the create screen. For an existing one, click Edit in the ··· menu on its page. A quote shows Edit until it is archived. An order shows Edit only while it is not archived or voided, its payment is unpaid or paid, and production has not started.
  2. Click the part card to open the configure dialog.
  3. In the model viewer, click Set Orientation.
  4. A rotation gizmo appears over the model. Drag the handles to rotate the part into the correct build orientation. On a new order, Original returns the part to its uploaded pose, and Snap lays the face you click flat on the build plate.
  5. When the orientation looks right, click Done.

A fixed orientation icon appears next to the part name on the part card. The constraint is saved with the part when you save the order or quote. Changing the part's material, process, colour or post-processing does not clear it.

Change an existing constraint

Before you save the order or quote, you can still adjust the orientation:

  1. Click Set Orientation again.
  2. The gizmo starts from the current orientation so you can adjust from where you left off.
  3. Click Done.

After you save, the constraint is stored on the part specification. The configure dialog then hides Set Orientation. Click View Orientation to show the part in its constrained orientation, and Hide Orientation to return to the default view. To change a saved constraint, remove it from the part specification and add a new one, as described below.

Remove a constraint

Before you save the order or quote:

  1. Open the configure dialog for the part.
  2. Click Set Orientation to enter orientation mode.
  3. Click Clear. The constraint is removed at once, with no confirmation.
  4. Click Done.

The fixed orientation icon disappears from the part card once removed.

After you save, remove the constraint from the part specification instead. This needs the Pro plan:

  1. In the main sidebar, go to Production > Parts > Specifications and open the part specification.
  2. In the Manufacturing Constraints section, click ··· next to the constraint and select Delete.
  3. To set a new orientation, click + next to Manufacturing Constraints. See Part specifications.

Where the constraint is visible

WhereWhat you see
Order and quote editorFixed orientation icon next to the part name. Hover over it to see a preview labelled "Fixed orientation"
Configure dialog model viewerView Orientation shows the part in the constrained orientation
Order and quote part detailsFixed orientation icon on the part row
Production backlog and progress screen (Factory Floor plan)Fixed orientation icon on the part

Last updated on

On this page